Z reset position point question


what is the exact MM for every 1 added or subtracted when leveling? for example lets say 1877 is 11.0 with the ez plate on pdms, how many MM does it go down (or up) if i lower(raise) the ZRP to 1876? is it .30mm or .03mm?


In my opinion 1877 translates to 187.7 mm. One step equals 0.1 mm.


@peopoly @peopolysupport

is this correct?


It is the lenght the z axis moves down towards the vat.


Yes this is correct.


yes it is