What tolerance can expect?


#1

What is the normal tolerance can I expect from the Moai? + -x.xxx

Thanks
Bob


#2

if well calibrated and you compensate for resin shrinking I’ve got even ±0.05 tolerance. Normally I’d say ±0.2 XY


#3

Thanks Matt for the info

Bob


#4

This is assuming you can get it to print accurately in the first place. Even with careful calibration, many of us have trouble printing completely round parts on any part of the build plate except the direct center. Exact tolerances are fairly easy to achieve on the Moai, but exact accuracy is not.