Print Fails 95% through

#1

Hi Guys,

Having a weird issue. I have Just tried to print some components on my Moai130. It gets around 95% of the way through without any issue. Then for some reason the display has changed the layer count. It should be around 2500 total layers, but it resets to around 450. Also the VAT isn’t returning back to level after each layer. This has happened twice now, admittedly with the same file and g-code as I thought I had just ran out of resin on the first one. Settings on the printer are all fine as nothing has changed from previous successful prints. Do you think its just a matter of an issue with the g-code?

Any ideas?

BR

KS

0 Likes

#2

Yes most probably a corrupted gcode.

0 Likes

#3

Yep, thats my thinking. Just re-slicing and going to re-print. Its was a 28hr one as well!

BR

KS

0 Likes

#4

thou shall also format SD card before each print :slight_smile:

2 Likes

#5

that’s is really sad to hear, re-format the SD card and it would be good to go again

0 Likes