Leveling help please ~


#1

20181211_103030

Leveling help please ~

I’m sorry. I am Korean.
English is not allowed.
I use Google Translator
So there may be communication problems.
please understand.

I am making the case.
But the case is different in scale.

Output test.
Leveling is done in 10 cm squares.

Can all sizes be 10cm?


#2

Sorry to hear your issue, here is a survey we use to help us get as much info as we can from user so that we could provide best solution. Even if you might have provide some info already, please answer the question for the completeness.

Room temperature (best to be >25C):

What type of resin:

Build plate type: (Standard 1-piece / easy to level)

Vat: (Silicon vat / FEP vat)

What type Vat: (Peopoly Original vat, Recoated Peopoly vat, custom vat made by user)

Leveling measurement:

A, B, C, D (example 10.9mm)

Firmware version:

System Setting is default per Peopoly recommendation? (Yes/No)

Laser Power:

Z-reset position:

PM Motor Speed:

Z Follow Speed:

Software used to slice?

If using Asura,what version and profiles

If using Cura, what version and Profiles:

Infill %:


#3

since you are printing directly off the plate, there are compression on the first few layers and you will lose accuracy there. Please raised the cube above by at least 3mm with support to avoid layer compression.