!Gcode Fix in 2.2.3!

#1

First off, I would like to apologies for all the confusion with Asura 2.2.3. There has been some revisions and bug fixes in the past. The biggest one was with the Gcode. The next was with older 130 Profiles and the 200 Calib. Those have also been fixed as well and are in working order.

If you have downloaded 2.2.3, please do a clean install to get all the bug fix’s.
https://drive.google.com/drive/folders/1swATqFfq6awU1ORFn2bNOKt28IFpIl5l?fbclid=IwAR0atCApN9-HtmuO8l5HRWI0xeMRCPhrJAKXW-5YFQK1NFUJWv2XAFqs20A

image

As for the Version numbering there has been a lot of complaints about it. I did pass that along to the rest of the team and they added the revision date next to the “2.2.3” (as seen above) and will update that number if there are more revisions.

I do apologies for the inconvenience that this may have caused you.

------------Original Post------------------------
The problem with the support Gcode in Asura 2.2.3 has been fixed!

You can now Re-Download Here! https://drive.google.com/drive/folders/1swATqFfq6awU1ORFn2bNOKt28IFpIl5l

image

66720812_465850270911426_5983327143445135360_n Simplify3D_b1HIWKJZkV

1 Like

Need help printing the calibration file
#2

Please help us in the Moai community and give each bug fix a different version number.
A bug fix on 2.2.3 should be announced as 2.2.4 or at least 2.2.3.beta2

2 Likes

#3

Hello Mark, I understand your concern. This post was just updated with the new information. I did pass along the complaints from everyone about the numbers. Below is the newest version with the revision date.
image

0 Likes