3/4 Pegs Printing

Hello,

I am attempting to run the DIY test usingthe FEP vat. My first attempt I was conservative when using the resin so I didn’t add very much. As I result I only printed A and C successfully and half of D. I reattempted with more resin. This time I got A, C, and D, but they were all slightly slipped off their base. My first attempt A and C printed perfectly. Still haven’t been able to print peg B. I increased the stage Z axis height to 1817. Any other advice?

Thanks in advance.

you can try to increase the z reset to 1818 or 1820, it’s normal for FEP vat

1 Like

Re-leveling and decreasing the z reset worked well and I am now able to print 4 perfect pegs. Thanks for your help!

1 Like