Printing advice


Topic Replies Activity
About the Printing advice category 1 July 7, 2017
High Viscosity Custom Resin 1 November 11, 2019
3/4 Pegs Printing 3 November 11, 2019
Test prints work but exports from Cura not printing 13 November 11, 2019
Problems printing with Tough 5 November 11, 2019
Has anyone used Makerjuice standard resin? 10 November 4, 2019
Unable to print 6 October 31, 2019
First layers not printing properly? 5 October 31, 2019
Prints Coming Out Elongated and Distorted 6 October 31, 2019
Moai printing issues 3 October 29, 2019
Bluecast x10 success 15 October 25, 2019
Some Problems with the testcube and moai 200 calibration 11 October 24, 2019
Another layer separation and failing prints 8 October 22, 2019
Peopoly Moai Print Fails with Tough Resin - Resolved 14 October 22, 2019
Printing issues 5 October 21, 2019
Moai 200 Problems 4 October 18, 2019
Original Moai - Prints Failing Sticking to FEP Vat 8 October 16, 2019
Failed 1st test print 7 October 15, 2019
Moai not printing my designs, Test print ring successful 3 October 14, 2019
My Moai 200 printer settings 7 October 13, 2019
Laser Test File 5 October 5, 2019
We Made A Typo With Firmware for FEP 4 October 3, 2019
All new prints fail 4 October 3, 2019
Help with Failed Print 21 October 2, 2019
Failed Prints: Frayed and Thin Lower Layers 8 October 2, 2019
Test prints fine new file won't print 14 October 2, 2019
Prints leaning in Y-Axis 9 September 27, 2019
Confusing answers from Peopoly on settings 7 September 26, 2019
Not printing / Freezing 10 September 25, 2019
(Solved) Need help printing the calibration file 128 September 24, 2019